Allergy One
Store Front(none)Product ListBasket ContentsCheckout        Call Toll Free: 1-800-989-0111 
Contact Us
Medical Resources
Price Match Guarantee
Shipping & Billing
Ask the Advisor:
Allergy One
7375 N. Fresno Street #101
Fresno, CA 93720
Tel: 559.432.1900
Toll Free 800.989.0111
Fax: 559.432.1910
Merchant Services
IQAir GC VOC and Gas Control Air Purifier


Item Code: IQGCVOC2
Price: $1,299.00

Includes Free Shipping!

IQAir GC VOC and Gas Control Air Purifier Description Below


Basket Contents
Quantity in Basket: none

Post Filter Sleeves for GC Series and Dental Series Air Purifiers
Pre-Filter for GC Series Air Purifiers
Gas Cartridges for GC VOC and Gas Control Air Purifier



The IQAir GC Series was specially developed for the removal of gaseous chemicals. The GC Multi Gas control air purifier is the recommended unit for MCS (multiple chemical sensitivity) sufferers. This unit does not have the HyperHEPA particle filter of the HealthPro series but instead has a special wide spectrum gas phase filter which is able to capture a wide array of gaseous chemicals at high levels of efficiency. Other features of IQAir GC Series systems important to MCS sufferers are:

  • Contains no gaskets or sealants which leak chemicals
  • The housing is made of fully cured, non-off-gasing premium ABS plastic
  • The IQAir fan motor is located before the gas phase filter and before the particle post filter. The fan motor is varnish free.
  • The gas filter is followed by a high-efficiency particulate post-filter that holds back any particles from the gas phase filter.
  • The gas filter cartridges can be changed independently of the other filters in the air cleaner. This avoids cross contamination and allows for independent replacement. The gas phase filter is protected by a high-efficiency pre-filter against premature particle contamination.
  • Has near HEPA quality particulate filtration with better than 99% removal of particles larger than 0.3 microns.

All systems come complete with filters, remote control, batteries (for remote control), owners manual, set of 4 casters, 10 foot power cord, and certificate of guaranteed performance.

Specifications Other Information
1. User Control Panel
2. Carrying Handle
3. No-Draft Diffuser
4. Particle Post-Filter Sleeves
5. Gas and Odor Filter Cartridges
6. Snap-Open Locking Arms
7. High-Performance Centrifugal Fan
8. Advanced Fan Control
9. Pre-Max Pre-Filter (Class H11)
10. Dual Floor Air Intake

Customized Gas and Odor Control The GC VOC is compact and customized for specific gaseous contaminants and odors. Just like a professional gas mask, IQAir maximizes filter efficiency for different gases and odors by offering the right filter cartridge. And while gas and odor control is a particular strength of these systems, the GC Series also offers excellent filtration efficiency for particles.

Gas Cartridge Technology The IQAir GC VOC uses four reusable filter cartridges to hold up to 12 lbs. of gas phase media. The cylindrical shape of these cartridges allows for optimum contact between the air and gas phase media, which ensure high removal efficiencies. The large surface area of the cartridges enables high air flow rates. Since IQAir gas filter cartridges are reusable, replacing them is not only economical, but also environmentally friendly.

High-Efficiency Particulate Filtration The particulate filtration GC units complements the gaseous filtration process by removing over 99% of particles before they can reach the gas phase media. This increases the efficiency and life of the media by preventing its pores from clogging. The GC units' overall filtration efficiency for particles is 99% at .3 microns. The post filter is electrostatically charged to trap particulate pollutants and microorganisms (bacteria and viruses)

Number of Selectable Fan Speeds 6
Air Delivery (with new filters installed) per Speed 1 - 35 cfm
2 - 60 cfm
3 - 95 cfm
4 - 125 cfm
5 - 150 cfm
6 - 235 cfm
Maximum Coverage Area 1000 sq ft   (based on maximum fan speed and an 8.5 ft ceiling)
System Efficiency for Particles 99% or more at 0.3 microns
99% for smaller particles
Power Requirements 115 VAC 50-60 Hz   The entire electrical system is UL certified.
Energy Consumption (Max) 215 W
Standby Energy Consumption 3 W
Power Cable Grounded Detachable 10 foot
Dimensions H 28"     W 15"     D 16"
Net Weight (including filters) 51 lbs
Warranty Period 1 year on unit including fan motor, excluding filters
Number of Filter Stages 3 (particle pre-filtration, gas absorption and particle post-filtration)
Total Number of Replacement Filters 9 (1 HEPA-type pre-filter, 4 gas cartridges and 4 post-filter sleeves)
Particulate Pre-Filter Mini-pleat HEPA filter with efficiency of 98% at .3 microns
Amount of Gas Phase Filter Media Between 11 and 13 lbs. depending on media
Cartridge Design Disposable Cylinders
Particulate Post-Filter Four electrostatically charged 98% at .3 microns fiber media sleeves
Filter Life Pre-Filter 6-18 months
Sleeves 2-3 years
Cartridges 6-12 months (filter life is dependant on the operating environment)
Number of Housing Modules 7
Housing Material ABS (UV-stabilized)
Color of Main Housing/Arms Light Gray/Blue
Air Intake Two side openings at base of unit
Air Outlet Via diffuser with horizontal 320 degree opening on top of unit
Fan Type Centrifugal fan, backward curved, single inlet
Bearings Maintenance-free steal ball bearings
Speed Regulation Voltage reductions via capacitor switching
Electronic Control Panel
Control Panel Finish Polyester overlay panel
Main Display Liquid crystal display, 16 character x 2 line
Status and Indicator LEDs Timer Status LED, Filter Life Status LEDs, Fan Speed Indicator LEDs
Display Languages English, French, German, Italian, Spanish

Copyright © 2000-2019. - - All Rights Reserved.